Skip to Content
  1. All Products
  2. BUILD YOUR OWN
  3. Conduit Target Stand Side Bracket
Default USD pricelist
Conduit Target Stand Side Bracket

Conduit Target Stand Side Bracket

https://www.tatargets.com/web/image/product.template/6648/image_1920?unique=714a837
(0 review)
If your current side brackets are bent or damaged, consider replacing them here.  You need TWO of these for One complete conduit gong stand. Order as many as you need. The side brackets are powder coated and ship for FREE in the lower 48 states. No tools needed. Does not include gongs, hooks, or conduit.

$ 20.00 20.0 USD $ 20.00

Not Available For Sale

This combination does not exist.

Powder Coated 2X4 Gongholder RAL1019 GREY BEIGE
Contact Us

Share

Conduit Target Stand Side Bracket

The Conduit Target Stand Side Bracket (Single) is a single bracket that is used to create the conduit target stand. The legs slip into 3/4″ EMT conduit. The teeth of the bracket help pinch the cross 3/4″ EMT conduit bar for stability. This is a SINGLE Bracket and does NOT include gongs, hooks, or conduit. The COMPLETE Conduit System WITH conduit and hooks can be purchased HERE.

Manufactured In The US, Because It Matters!

Our company is committed to manufacturing our steel target systems right here in Pennsylvania. You’ve seen the amazon gong targets and systems, most are made in China. If you don’t care about building up US manufacturing, just buy whatever is cheapest. But if you care about supporting US businesses employing US employees, audit who you spend money with! Our company has been manufacturing steel target systems in SE Pennsylvania since 2015.

Built To Be Portable And Adjustable.

Adjust the length of the legs and the cross conduit to suit your needs. When you are finished shooting you can simply disassembly and throw the loose components into your vehicle. Always remember to disassemble with gloves to avoid lead exposure!

Safe, Strong, And Capable.

This Conduit Gong Target Stand kit allows the hanging of a multitude of different gongs and it creates a safe shooting gallery of sorts. The hooks are designed to pivot so that the plate can swing freely when struck, which lessens wear and tear on the gongs. Users could also use chains or straps fastened to the cross conduit pipe if desired. One thing to note: Be VERY careful what steel targets you purchase! While you CAN use other brands of target plates on our gong hanger, it is your responsibility to make sure you are purchasing safe steel and using them in a safe manner. We cannot guarantee safety or performance/distance recommendations with ANY gongs or target plates but our own. That isn’t a sales pitch. We just know there is much snake oil in this market. Buy from us with confidence.

Getting The Most Out Of Your System:

FREE SHIPPING IN LOWER 48 STATES!

The Conduit Gong Target Stand is built to get you onto the range and honing your skills at a SOLID price point. This Conduit Gong Side Bracket does NOT include gongs, hooks or conduit unless you add them separately. Be sure to do that before you check out!

Download the user/instruction manual for this product here: Conduit Gong Target Stand Instructions.

​

Mount TypeConduit Lock-in-Place Brackets
Gong Mount TypeConduit Hanger Sold Separately
AssemblyYes, Assembly Required. No tools required.
Total weight of systemapproximately 5 pounds without conduit or target plates
BracketsCNC Cut
Hardware Included?No hardware is required.
FinishBrackets and hooks are powder coated “Base Station Beige”

– PLEASE NOTE: Brackets and Hooks are NOT designed to be targets. Bullet impacts WILL cause damage.

– NEVER intentionally shoot brackets or mounting posts. Always wear gloves when handling this product, ESPECIALLY after shooting to avoid sharp edges and lead exposure.

– NEVER shoot the conduit. This WILL cause damage to the conduit.


Frequently Asked Questions:

Answer: This system takes less than 60 seconds to assembly. Easily this is our fastest system to set up.

Answer: The Conduit Gong Stand is rated to hold approximately 30-40 pounds of gongs. This is NOT designed to hold a large amount of targets. You will find better performance by keeping 3 or less gongs on this system. If you are looking for a system that holds a massive amount of weight, you may want to consider our Deluxe Gong Stand. Where the conduit system shines is the incredibly fast assembly time and ease of use. If that is most important to you, then this is probably the system for you.

Answer: The powder coating will only chip if you bang the components into something else, or if fragmentation hits it. Over time, expect some normal wear and tear on the finish. This is acceptable and normal. However, items that do not get hit with fragmentation will retain their finish for years to come. We don’t like the idea of shipping dusty rusted brackets to you. So we don’t. Just one other way we add value to our products.

Answer: Gong targets feature our 1 year warranty and are guaranteed to be free from failure within that year when used properly. You MUST use proper ammunition (less than 3,000 FPS, NO STEEL CORE OR PENETRATOR, AND follow our distance recommendations ALWAYS).

Answer: We include two gong hanger hooks and two “y” shaped brackets for the conduit. We currently do NOT carry the conduit for this system. You will need to visit your local hardware store for that. Make sure you purchase 3/4″ Conduit. The brackets for this system are mild steel and are not intended to be shot. Fragmentation will not be an issue, but you should ALWAYS insure your rounds do NOT impact the brackets, hooks, or conduit.

Answer: Most conduit at your local hardware store will be 10′ lengths. For this reason, we recommend you cut them down to 5′ long. Most hardware stores can do this for you and we HIGHLY recommend letting a professional handle this part for you. A side benefit is most conduit is galvanized, which will protect it from rust for many years.

Answer: We produce our products in Lancaster County PA. We oversee every step of the process, QC, production, packaging, and shipping. From start to finish, TA Targets is manufacturing high quality systems for hard use. Our owners own the machinery, facility, equipment, etc. We have invested heavily in newer specialty equipment to further streamline our processes and increase quality even further.

No. The “armor” we use for the strike plates (actual target impact plates) is made from a proprietary material that is manufactured in Sweden. this is the best material we have found in the world. We were largely dissatisfied with the QC of American made strike plates and had too many issues with quality control. Eventually we hope a US manufacturer creates a material that is as available and as stringent as our Swedish plate. For now, this is the best material to service our customers. US Manufactured AR500 and AR550 is used in areas that are NOT main strike plates. Some examples of this are the Rifle Dueling Tree Shields, Plate Rack Shields, Arachnid front shield and hostage brackets.

We source all other raw materials like our mild steel and AR500 steel from domestic mills. SOME hardware will unfortunately come from overseas as there are no US counterparts available at this time. We do NOT use Chinese mild steel or AR500 steel in any circumstances in any of our systems.

Maybe. Just in case, be sure not to eat the paint or lick the target before or after you’ve shot it. If you are just curious, led tastes horrible and will probably cause mental damage. If you have done it once you are likely to do it again. Handle at your own risk, if you choose, you may wear an industry grade hazmat suit and gas mask with a HEPA filter and good luck charm on your wrist. For more information visit https://oehha.ca.gov/proposition-65