The first time you set it up it will take a few minutes. After that, it can be set up in less than a minute. The ONLY tool needed is a 7/16" socket or wrench to tighten the 2X4 legs into position. We INCLUDE a free tool with this system to assist, or simply use a tool you have laying around at home. Once the boards are in place, they can be left in place until they eventually need replaced. The pivot mechanism allows the legs to fold into a more transportable and compact size for your convenience.

We have tested this system with over 200 pounds hanging from it. We generally would say that you should keep the system as light as possible and minimize side to side rocking while in use. If you get too much weight swinging side to side, it COULD bend the brackets. Replacements can be purchased in the event that you ever need new parts, but if used properly this system will last a lifetime.

The powder coating will only chip if you bang the components into something else, or if fragmentation hits it. Over time, expect some normal wear and tear on the finish. This is acceptable and normal. However, items that do not get hit with fragmentation will retain their finish for years to come. We don't like the idea of shipping dusty rusted brackets to you. So we don't. Just one other way we add value to our products.

Genesis Systems feature a 90 day manufacturers warranty with an optional lifetime warranty you can purchase. You MUST use proper ammunition (less than 3,000 FPS, NO STEEL CORE OR PENETRATOR, AND follow our distance recommendations ALWAYS). For more information visit https://tatargets.com/warranty/

Use the options on this page to select your desired choices. We offer an option to purchase standard hooks OR armored hooks. Additionally, you can choose if you would like to purchase your gong targets on this page. Further, you can also purchase the wood boards you will need for assembly on this page.

We recommend 48" long boards for all four legs. The center/cross 2X4 can be longer, but we would recommend ONLY going as long as 72". 48" across is the ideal length. For your convenience we offer the option to add 2X4 boards on this page. Please add the boards to your order if desired.

We produce our products in Lancaster County PA. We oversee every step of the process, QC, production, packaging, and shipping. From start to finish, TA Targets is manufacturing high quality systems for hard use. Our owners own the machinery, facility, equipment, etc. We have invested heavily in newer specialty equipment to further streamline our processes and increase quality even further.

Yes. The 3/8" AR500 is a Domestic Material manufactured here in the United States. It is a great balance of low cost and longevity. Please note: Gong targets are NOT close range rifle rated! Follow all distance requirements. Read more about Distance Recommendations of our Genesis Systems at our user manuals page.

The Remainder of the steel is purchased from US mills. During economic crisis times, we have occasionally sourced Canadian steel for our A36/ HRPO steel. While this is rare, it does happen if/when US mills decide to shut down for fake pandemics and such. You remember 2020? In those situations we sometimes have our hands tied to keep customers orders moving. We never buy garbage plate and never buy Chinese plate.

The recommended distances would be based on the targets in use. Generally speaking, this system is meant for 10 yards with pistols, 25 yards with magnum caliber pistols, and 100 yards minimum for rifles.

Maybe. Just in case, be sure not to eat the paint or lick the target before or after you’ve shot it. If you are just curious, led tastes horrible and will probably cause mental damage. If you have done it once you are likely to do it again. Handle at your own risk, if you choose, you may wear an industry grade hazmat suit and gas mask with a HEPA filter and good luck charm on your wrist. For more information visit https://oehha.ca.gov/proposition-65