Skip to Content
  1. All Products
  2. Reactive
  3. Point 1 Micro Popper Target
Default USD pricelist
Point 1 Micro Popper Target

Point 1 Micro Popper Target

https://www.tatargets.com/web/image/product.template/6734/image_1920?unique=714a837
(0 review)
Point 1 Micro Popper Target

If you are looking for a challenging and exciting target to push your pistol shooting skills, look no further. The Point 1 Micro Popper target is a collaboration with Donovan from Point 1 Tactics. We designed this target specifically for pistol fundamental training. The 4X6 paddle forces accountability. Solid hits will result in the paddle fully rocking backwards and then automatically resetting. If you desire a COMPLETE Micro Popper WITH a base, shop our Micro Popper System.

Benefits of training on this system:
  • High accountability
  • Challenging system that builds good foundations
  • Great visual feedback while training
  • Audible feedback with successful hits
  • Lightweight and portable
  • Simple, easy to use
  • Use with spring for Auto-Reset capability, or remove the spring and use as a knock-down target.
  • Manufactured right here in Pennsylvania

This system was designed to work with our Genesis Steel Target Base, but it will work with our other bases as well.

*Designed for Pistol Use*

$ 160.00 160.0 USD $ 160.00

Not Available For Sale

  • Silhouette

This combination does not exist.

Contact Us

Share

Point 1 Micro Popper Target (Upper Assembly)

The Point 1 Micro Popper Target is a collaboration with our close friend Donovan from Point 1 Tactics. We teamed up with Donovan to create a Micro Popper target that is purpose built for serious pistol training. Make no mistake: This target will push your skillset and resolve. We likely do not need to say this, but this system is meant for those who desire to train to that top 1% level. Note: This is the upper assembly of the Micro Popper Target. If you desire to purchase this as an entire system with our Genesis Steel Target Base, Shop HERE.

Small Target Forces Accountability

The Point 1 Micro Popper Target is all about focusing in on those pistol fundamentals. Shooting this target at distance is extremely humbling and requires you to do your part. This target helps to built focus, to call shots, and to work through pressure while training. Additionally, the auto reset function adds fun to your range day. Most modern pistol calibers will fully knock down the paddle. The custom wound spring will then reset the paddle back into its static position, ready for the next string of fire.

Shot calling and skill building

Solid hits will result in a fast knock down and reset action. Poor hits may result in little to no movement. This means you are programming your mind to pay attention to the RESULTS of your bullet impacts, not just that you hit some arbitrary scoring zone. This builds confidence and skills quickly and reinforces the good habits you are building every range day. We chose a 4″X6″ paddle that indexes on the pivot mount for consistency and skill building. Quality Domestic (US) AR500 steel means the plate will withstand countless rounds and hours on the range.

Premium components, precision manufactured

You deserve only the best. We utilize high precision lasers to cut the components. Skilled Press brake operators bend the components to perfection every single time. The edges, bends, logo, and finish all reinforce the fact that this is an elegant, quality product meant for serious use. Further, you can be confident supporting a US company manufacturing our products right here in the great state of Pennsylvania. You might be wondering how we protect the 2X4 tube. We include an AR500 guard for each Popper target. This further aids in protecting your system and investment from lower impacts.

Point 1 Micro Popper Targets Include the Following:

This system is sold as a bracket, pivot, paddle, spring and hardware. This product alone does NOT include a base/target stand. You can shop those separately on our site, or shop the complete Micro Popper System. Compatible with our Genesis Base, Breakdown Base, and our Gen 3 20″ round base.  For your training we include the following:

  • (one) 4″X6″ Paddle made from 3/8″ AR500 Steel
  • (one) Pivot Bracket
  • (one) Pivot mount (this part bolts to our breakdown base tube)
  • (one) 2X4 Breakdown Base Tube (slides over the 2X4 Post)
  • (one) 1/2″ Carriage Bolt, Yellow Zinc Finish
  • (one) 1/2″ Locking Nut
  • (one) Custom wound torsion spring
  • (one) 1/2″ Clevis Pin and clip
  • (2) 3/8″ Carriage Bolts
  • (2) 3/8″ Locking Nuts
  • (2) Flat Washers
  • (3) 3/8″ x 1″ Grade 8 Hex Bolts for tightening to 2X4 post
    • (One) attaches the post guard to the tube
    • (2) are used on the tube (one side, one rear) to tighten to 2X4 Post
  • (One) 3/8″ X 2 1/4″ Grade 5 Hex Bolt for installing into the TOP of the bracket to put tension on the face of the 2X4 Post.
  • (one) AR500 Post Guard (To protect the tube from lower impacts)
  • Powder coated Grey Beige (Tan) for elegance and durability
  • Paddle is Powder Coated Mineral Bronze

​


 MaterialMild Steel & 3/8″ AR500, Laser cut, CNC formed
Dimensions4″X6″ AR500 Target Plate
Assembly required?Yes, some assembly required
FinishPowder Coated finish (paddle and components)
Construction and AssemblyBolted components, Laser Cut, CNC Formed
Target Base Included?No. You must order separately.
Target MovementSpring Loaded, Automatic Reset
Hardware Included?Yes.
Approximate Weight10 Pounds

Frequently Asked Questions:

Answer: There really is no wrong answer to this question. Any of our Steel Target bases will function with the Point 1 Micro Popper Target. If you are looking for the least expensive option, the Genesis Steel Target Base is the least expensive. Choose the 20″ Round Base or the breakdown base for maximum stability.

Answer: You should only use this system with our 4X6″ target plate that is cut to index on the pivot arm. While other gong plates MAY work, we do not recommend using them. In the future we plan to release other shapes and sizes. You MUST only use plates that are designated as for this system! With that out of the way, expect to see other shapes and sizes coming in the near future for this system.

Answer: This target plate is manufactured from Domestic (USA) AR500 steel. It is NOT the AR550 steel that we use on our A-DAP target systems.

Answer: A standard 2X4 works fine for the 2X4 tube. It will fit “looser” than previous bases. We oversized this tube slightly to assist in removal of boards in damp environments.

Answer: We produce everything in beautiful Pennsylvania. We are also sticklers for quality and consistency. Therefore, we needed to keep our manufacturing under our wing. We make each product with love and care for serious use right here. Support US small business making products HERE!

Maybe. Just in case, be sure not to eat the paint or lick the target before or after you’ve shot it. If you are just curious, led tastes horrible and will probably cause mental damage. If you have done it once you are likely to do it again. Handle at your own risk, if you choose, you may wear an industry grade hazmat suit and gas mask with a HEPA filter and good luck charm on your wrist. For more information visit https://oehha.ca.gov/proposition-65